Top Rated Local AC Repair & Plumbing Services in Conroe, TX
Our family are the professionals to call when it comes to Air Conditioning, Heating & Plumbing service for your homes and businesses in Conroe, TX. Our family gives you our personal promise that we won’t be happy until you’re 100% satisfied! Our reputation is based on your 100% satisfaction, and we take that promise seriously. It’s a part of our company mission!
Zip Codes and Area Served:
Call us now at (936) 271-2030 for fast and friendly service. We’d love the opportunity to earn your business as we have with your Conroe, TX neighbors.
See what your neighbors are saying about our services below!
for Conroe, TX
Our Reviews by City
Great Service, Honest Tech
Stephen K - Conroe, TX
Mario was very open and honest with what needed to happen to ensure my AC unit was working optimally. Great experience.
Kay - Conroe, TX
Consistently, Bradbury Brothers and "our" AC man - Fernando - have responded with professionalism, explaining each and every issue and how to attack the problem and the finished issue is explained with pictures, answering questions and making sure we were satisfied with the service.
Thorough maintenance checkup
William - Conroe, TX
excellent service and very efficient
Carroll - Conroe, TX
Steve - Conroe, TX
Juan was excellent. Very polite and effective
Carole - Conroe, TX
Mario represented this company well. He was immediately friendly, professional, and knowledgeable. He got right to work, then gave me a thorough and easy to understand explanation of the issues he found with our HVAC, including pictures from the attic so I could see exactly what he was describing. Really made it easy for me to make decisions. Terrific service. We will definitely call on Bradbury again.
Brian - Conroe, TX
Great customer service and technician. Technician was on time, friendly and very knowledgeable.
Great, friendly service
Thomas - Conroe, TX
Appreciated Juan’s service in helping us understand the HVAC improvements needed.
He was great
Braiden - Conroe, TX
Thanks for a job well done
Rebecca - Conroe, TX
Matt was courteous, professional, thorough and he gave us a good sense of a job well done through his complete inspection.
Drain was clogged. Cleared drain line. Emergency pan drain runs into he ceiling of the addition, and it doesnâ€™t appear to have been completed to termination and is instaead falling about 6 to 8 feet short and dripping ing the drywall. Home warranty is. Owing tomorrow to discuss replacement.
Customer had us out today for a backed up AC condensate line and a slow draining sink. Found the AC pan full of water. Installed blow out valve and blew line out. Heard water run from condensate line when the blockage cleared. Vacuumed as much water from pan as possible and everything seems to be working as it should. Found the sink kids bath to be slow. This sink also has AC condensate tied into it. Ran hand top and cleared blockage. Filled and drained sink multiple times to check for leaks and functionality, everything is working as it should. There is no warranty on drain cleaning. Recommend AC tech come out and look at the older system. Ducts from this system seem to be sweating a little and I am unsure if this is correct or not.
Arrived to the Corley residence to look at the power issue that heâ€™s having inside the house. After taking off the panel cover and the disconnect cover I noticed that they do not have power on one leg it is only getting 9 V not the 120 V. I like the homeowner know that he should call the power company. At this point I do not see a reason to do a follow up call. If he calls back to see if we do electrical underground repairs at this time we do not.
Arrived to house with no power to thermostat and ad not coming on. Checked contactor for power , in-line was 120/4. Went to check service disconnect but system has no disconnect , and no breaker box within code range. Breaker box is located across house in laundry room. Customer had also lost power to a couple outlets in the home. Scheduled for Jim to come out and take a look later today. No service fee will be charged by Electrical.
System- Approx Age of System: 10yrs Refrigerant Type- R410a Metering Device- TXV SP/HP: 123/433 SLT/LLT: 54/100 VSAT/LSAT- 42/122 Superheat/Subcool- 12/22 Outdoor Entering Air Temp-95 Outdoor Fan FLA- 1.1 Compressor RLA/LRA- 19.3/150 Contactor Voltage- 244/26 Capacitor Rating- 69.93/7.39 Indoor Return Dry Bulb Temp- 75 Return Wet Bulb Temp- 60 Supply Temp-59 Temperature Difference- 16 Required Difference- 16-20 Blower FLA-8.0 Filter Sizes â€“ 16x25x1, 20x25x1 Changed Filters â€“ Acceptable Blew out drain line: N Returned tstat to original settings: Y Unit operational; prior to leaving: Y Notes- Unit was operational on arrival. Checked filters. Checked operating pressures and temperatures. Checked indoor and outdoor electrical. Head pressure and subcooling are high. Possible restriction in refrigerant cycle. Through chemical should be done be any adjustments to charge are made. Condenser LRA is over rating of 150a. Contactor is humming, pitted and burnt. Un
AC Diagnostic System: Refrigerant TypeR410A Metering Device-TXV SP/HP176.5/453.6 SLT/LLT77.5/89.6 VSAT/LSAT62.1/126.1 SH/SC15.4/36.6 Outdoor Entering Air Temperature 94 Filter Size(s) Returned tstat to original settings: Y Unit operational; prior to leaving: Y Notes: Upon arrival, homeowner stated that he found water filled in the pan again with the float switch cutting off the low voltage power to the condenser. Homeowner had already cleared emergency drain pan but had power off to the unit. Made the call for cooling and system kicked on accordingly. Found pressures very high, indoor temperature was 85 and outdoor temp is 94. Also heard weird noise coming from indoor blower motor compartment, found paper in the blower wheel was causing this noise. Removed and rattling stopped. Opened up coil access door and found evap coil is extremely dirty. Have provided recommendations to fix issues with system. Homeowner stated he would take care of issue himself. Explained how the float swit
AC Diagnostic System:Main Refrigerant Type R410A Metering Device-TXV VSAT/LSAT-50/109 SH/SC16/8 Outdoor Entering Air Temperature 95 Filter Size(s)20x25x1 Returned tstat to original settings: Y Unit operational; prior to leaving: Y Notes:at arrival found the condenser fan not running but compressor was. Quickly shut power and checked capacitor. Capacitor was rated 45/5 and reading 35/0 indicating failed capacitor. Recommended and replaced with turbo 200 and unit is now fully operational. Also while here i inspected the refrigerant, furnace, and coil. In the attic I did find organic growth in the supply air plenum and a gas flex connector improperly installed with pipe sealant on the flare fitting. Did give options to repair and will be following up with Lance regarding those issues. One other issue lance was having was a power outlet in the back patio has never been functional and he would like office to call him in regards for pricing to have an electrician Make A visit. No other i
System-main Approx Age of System: 2 Refrigerant Type-R410a Metering Device- TXV SP/HP:129/328-136/347 SLT/LLT:64/93-57/95 VSAT/LSAT-44/96-47/106 Superheat/Subcool-20/3-10.3/10.6 Outdoor Entering Air Temp-94 Outdoor Fan FLA- 2.4 Compressor RLA/LRA-18.2/151 Contactor Voltage-28/220 Indoor Return Dry Bulb Temp-77 Return Wet Bulb Temp-65 Supply Temp-60 Temperature Difference-17 Required Difference-16-22 Blower FLA- 4.8 Filter Sizes â€“ 20x25x4 Changed Filters â€“ N(clean) Blew out drain line: N (no blow out valve) Returned tstat to original settings: Y Unit operational; prior to leaving: Y Notes-System is working great, evap coil was swapped out a year ago and was not fully topped off. Added .5lb of refrigerant to top off unit. Inspector noted a few things on his inspection and I double checked everything to make sure they were properly inspected. Checked temp drop at supply plenum and at return plenum as it should be and temp drop is within range. One duct that was call
Follow up visit to replace under warranty run capacitor for the outdoor condenser. Replaced capacitor and checked for proper operation. (70/7.5mfd)System was fully operational before departure, thank you for choosing Bradbury Brothers to provide you with 5 star service.
Removed pump off unit and ran new ac line to vent . Made all connections and installed blow out valve . Checked for leaks and found none. Also took pictures of water heater cause of the shape itâ€™s in . Was not able to remove old pump cause it is hard wired in. Can get ac or electrical out to disconnect but not a must cause it will not be running anymore
System-main Approx Age of System: 12 years Refrigerant Type- R410a Metering Device- TXV SP/HP:122/317 SLT/LLT:59/96 VSAT/LSAT- 40/88 Superheat/Subcool-19/8 Outdoor Entering Air Temp-88 Outdoor Fan FLA- 1.0 Compressor RLA/LRA-12.9/127 Contactor Voltage-247/27 Capacitor Rating-66/6.4 of 70/7.5 Indoor Return Dry Bulb Temp-73 Return Wet Bulb Temp-64 Supply Temp- 57 Temperature Difference-16 Required Difference-16-24 Blower FLA- 9.3 Filter Sizes â€“ 20x25x1 Changed Filters â€“ N clean Blew out drain line: N no valve Returned tstat to original settings: Y Unit operational; prior to leaving: Y Notes-No overflow protection. Recommended overflow package in attic to help prevent water damage, and to allow drain line to be cleared if blockage occurs. Buildup of dirt found on outside coil, recommend a minor coil cleaning to clear buildup and increase efficiency. Unit is rated for 117 amps upon startup and currently pulling 127 amps. Recommend a compressor saver to reduce s
System analysis x1 Zone damper for upstairs getting stuck closed due to insulation blocking set screw. Removed insulation around set screw and tested damper. Damper opened and closed as needed. Will recommend to replace the damper if the issue is reoccurring. Also I did recommend air scrubber , with these zoned units that run off of a single stage furnace organic growth is very common, the air scrubber will help kill harmful air contaminates that enter the home. No other issues at this time.
Arrived to the Fryer residence to look to see if theyâ€™ll be any issues with the electrical side on hooking up the future mini split. Everything look good and I will get a price together. At this time thereâ€™s no reason to do a follow up call.
As Per Agreement
Replaced emergency drain pan. Made sure we had proper coverage all the way around the evaporator coil. Also made sure we had proper pitch in the pan.
Due to failed capacitor today the compressor saver took over as the capacitor allowing the system outside to run. Because the fan motor and compressor can suffer internal damage due to fail capacitor a lot of strain was put on this assisted for the compressor to reduce high energy draws. I suggest replacing the current compressor saver as to not experience a compressor saver failure in the future prolonging the life of the equipment. Because of the heavy restriction of airflow the system is producing a high moisture level causing a lot of condensation this lead to organic growth within the supply Plenum and evaporator coil. Restricted filters were removed and replaced today allowing proper airflow relieving high moisture levels, in order to prevent organic growth from growing and spreading I suggest adding a UV light system to breakdown bacteria airborne viruses and prevent reproduction of mold spores within the AC system. Not only will this combat the organic growth at this time they
Follow up visit to complete recommended repairs to improve performance of the system. Added compressor saver to the outdoor unit and replaced 7.5 mfd blower motor capacitor with turbo mini 7.5mfd run capacitor. Checked system for proper operation once the repairs were made. System is cooling properly at this time. LRA dropped to 34.3 inrush amps. Took payment over the phone with homeowner.
System-Main Approx Age of System: 1 Refrigerant Type- R410a Metering Device-TXV SP/HP:125/334.1 SLT/LLT:52.6/89.9 VSAT/LSAT- 42.8/103.5 Superheat/Subcool-9.8/13.7 Outdoor Entering Air Temp-91 Outdoor Fan FLA- R1.3 A1.14 Compressor RLA/LRA-28.8/152.9 A15.03/148.6 Contactor Voltage-238/26.7 Capacitor Rating-40/7.5 A 41.68/7.12 Indoor Return Dry Bulb Temp-75 Return Wet Bulb Temp-64.4 Supply Temp- 52.6 Temperature Difference-22.5 Required Difference-15-21 Blower FLA- 6.1 Filter Sizes â€“ 2- 20x25x1 Changed Filters â€“ N customer will change Blew out drain line: Y Returned tstat to original settings: Y Unit operational; prior to leaving: Y Notes-Arrived on site met, with customer. System was operational upon arrival performed ac tuneup. Found system to be operating within manufacture specifications. Spoke to customer about dehumidification mode to let them know it can be set lower if wanted. Scheduled next tune up date:Jan 13 8-10
Tested system function on arrival. Found blower operational. Thermal overload must have triggered last time. Tried to identify the cause - cycled on and off and gave significant run time. Discovered a joint, a 90, on the drain line leaking. Repaired the drain line. No further issue found at this time.
System- D/s Approx Age of System: 13 Refrigerant Type- R410a Metering Device- TXV SP/HP: 104.8/297.8 SLT/LLT: 87.9/88.3 VSAT/LSAT- 33.8/95.2 Superheat/Subcool- 54.1/6.9 Outdoor Entering Air Temp- 82 Outdoor Fan FLA- .9 Compressor RLA/LRA- 14.6/158.7 (high energy draws on start up) Contactor Voltage- 250 Capacitor Rating- 69/6 Indoor Return Dry Bulb Temp- 69.2 Return Wet Bulb Temp- 43.5 Supply Temp- 50.8 Temperature Difference- 18.1 Required Difference- 16-20 Blower FLA- 9.9 Filter Sizes â€“ 20x25x1/12x12x1 Changed Filters â€“ N (Customer will replace at later time) Blew out drain line: Y Returned tstat to original settings: Y Unit operational; prior to leaving: Y Notes- Outdoor unit has high energy draws and start up attic access not insulated properly. Scheduled next tune up date: Homeowners are in the process of moving I did not want to schedule next to an update. System- U/s Approx Age of System: 13 Refrigerant Type- R410a Metering Device- TXV SP/HP
System-Amana Approx Age of System: 7 Refrigerant Type- R410a Metering Device- TXV SP/HP:127.5324.1 SLT/LLT:49.8/86.2 VSAT/LSAT- 40.1/101.2 Superheat/Subcool-9.6/15.1 Outdoor Entering Air Temp- 70 Outdoor Fan FLA- .8 Compressor RLA/LRA-13/92 Contactor Voltage-243.8/25.4 Capacitor Rating-71.51 Indoor Return Dry Bulb Temp-55.8 Return Wet Bulb Temp-51.7 Supply Temp- 55.2 Temperature Difference-.1.3 Required Difference-16-20 Blower FLA- 9.6 Filter Sizes â€“ 20x25x5 Changed Filters â€“/N (still clean) Static pressures With both zones on rp-.45/fs-.53/sp-.16 With larger zone only rp.57/fs.53/sp.06 With smaller zone only rp .48/.78/.41 Blew out drain line: N (no blow out valve) Returned tstat to original settings: Y(74) Unit operational; prior to leaving: Y Notes-Upon arrival checked in with Mrs.Powell and located both thermostats. Made the call for cooling and system kicked on accordingly. At the outdoor unit refrigerant pressures are within manufacture specification
Arrived to the Millar residence to do an electrical inspection. At the time of the inspection everything looks safe and in good working order. I see no reason to do a follow up call.
Camera sewer line. Lots of roots were discovered. Recommend replacement.
AC Diagnostic System: Upstairs Refrigerant Type R410A Metering Device- TXV SP/HP 142/322 SLT/LLT 59/93 VSAT/LSAT 49/101 SH/SC=13/8 Outdoor Entering Air Temperature 91 Filter Size(s) 20x30x1 Notes:upstairs System was not doing anything. Turn unit on and neither furnace or condenser would come on. Upon inspection found water in the inline switch and pan. Let customer know we would have to clear out line set and remove water from pan. While I was checking refrigerant noticed condensers dirty and in need of washing. Recommended condenser washes for units and air scrubbers to get clean air in the home and to get ride of unwanted smells in the home customer would like to schedule cleaning early august got office to schedule it aug 7 9-11 Recommendations: . .
System-Main Approx Age of System: furnace(24yrs) condenser(6yrs) evap coil(1yrs) Refrigerant Type- R410a Metering Device-TXV SP/HP:135/363 SLT/LLT:60.9/102.9 VSAT/LSAT-46.9/109.3 Superheat/Subcool-14/6.4 Outdoor Entering Air Temp-91 Outdoor Fan FLA- 1.2 Compressor RLA/LRA-128/19.3 Contactor Voltage-28/220 Indoor Return Dry Bulb Temp-75 Return Wet Bulb Temp-65 Supply Temp- 55 Temperature Difference-20 Required Difference-16-22 Blower FLA- 7.2 Filter Sizes â€“ 20x20x1(2) Changed Filters â€“ N(dirty, do not carry truck stock) Blew out drain line: N (blowout valve) Returned tstat to original settings: Y Unit operational; prior to leaving: Y Notes-System is cooling great, biggest concern is the gas valve going directly into the furnace cabinet ( not up to code) which rubs on the furnace cabinet when on and can cause gas leak or possible fire.Also no sediment trap to catch debris in gas before entering gas valve. Also condenser is dirty and needs cleaning. No other issu
Came out to check why the water bill is so high for this customer. We put a gauge on the hose bib and shut off the meter, letting it set for 10 minutes it lost no pressure so there are no leaks on the yard line or the home. Confirmed the softner is working and the ro is working also. The customer needs to have the city check the meter for function because when we ran fixtures in the home the meter showed no signs of reading gpmâ€™s. The customer may also check with the manufacturer of the softner to make sure the head isnâ€™t malfunctioning and back flushing randomly. Customer paid with the card on file.
Checked ac line In attic. Needs to be reran to vent roughly 20 to 30 ft away. Got approval to do the job and will return Thursday to run the new line .
Customer called about a leaking water heater, so we come out to take a look and sure enough it was too far gone. Gave customer pricing to replace it with another 50 gallon natural gas water heater and he okayed it. Install went well we hauled off the old one also change the pan made all new connections, and everything is good water heater is lit and ready to go. Customer paid with a card on file no follow up today
System- carrier Approx Age of System: 4 Refrigerant Type- R410a Metering Device- TXV SP/HP:134.4/341. SLT/LLT:63.9/92.2 VSAT/LSAT- 46.7/103.8 Superheat/Subcool-16.5/11.5 Outdoor Entering Air Temp-86 Outdoor Fan FLA- .6 Compressor RLA/LRA-14.8 Contactor Voltage-242.3/26.5 Capacitor Rating- Indoor Return Dry Bulb Temp-77.8 Return Wet Bulb Temp-67.9 Supply Temp- 55.2 Temperature Difference-22.4 Required Difference-16-22 Blower FLA- 9 Filter Sizes â€“ 20x30x1/16x25x1 Changed Filters â€“ N (still clean) Static pressures With both zones open rp-.31/fs-.51/sp-.22 With larger zone open rp-.33/fs-.67/sp-.39 With smaller zone open rp-.31/fs-.77/sp-.5 Blew out drain line: N Returned tstat to original settings: Y(eco mode) Unit operational; prior to leaving: Y Notes-Upon arrival, checked in with homeowner and located both thermostats and hvac system. At the outdoor unit refrigerant pressures are within manufacture specifications for current outdoor temperature. Found run
System-upstairs daikin Approx Age of System: 5 Refrigerant Type- R410a Metering Device- TXV SP/HP:134.2/281.1 SLT/LLT:58.7/89.9 VSAT/LSAT- 46.6/91.4 Superheat/Subcool-12/1.5 Outdoor Entering Air Temp-82 Outdoor Fan FLA- .7 Compressor RLA/LRA-6.4/66 Contactor Voltage-245.8/26.4 Capacitor Rating-38.24/4.90 Indoor Return Dry Bulb Temp-71.7 Return Wet Bulb Temp-63.1 Supply Temp- 55.6 Temperature Difference-16 Required Difference-16-20 Blower FLA- 5.8 Filter Sizes â€“ 12x12x1/20x25x1 Changed Filters â€“ N (still clean) Blew out drain line: Y Returned tstat to original settings: Y(75?) Unit operational; prior to leaving: Y Notes- Scheduled next tune up date: System-downstairs American standard Approx Age of System: 11 Refrigerant Type- R410a Metering Device- TXV SP/HP:134.1/302.3 SLT/LLT:56.3/89.7 VSAT/LSAT- 46.3/96.4 Superheat/Subcool-10.2/6.8 Outdoor Entering Air Temp-82 Outdoor Fan FLA- .9 Compressor RLA/LRA-12.2/49 Contactor Voltage-242.2/25
System- Downstairs Approx Age of System: 4 Refrigerant Type-R410a Metering Device- TXV SP/HP: 127/312 SLT/LLT: 51/90 VSAT/LSAT- 43/98 Superheat/Subcool- 8/8 Outdoor Entering Air Temp- Outdoor Fan FLA- 1.4 Compressor RLA/LRA- 14.3/73 Contactor Voltage- 243 Capacitor Rating- 19.2/3.9 (45/5) Indoor Return Dry Bulb Temp- 74 Return Wet Bulb Temp- 64 Supply Temp- 55 Temperature Difference- 19 Required Difference-18 Blower FLA- 6.7 Filter Sizes â€“ 20x30x1 Changed Filters â€“ N (clean) Blew out drain line: Y Returned tstat to original settings: Y Unit operational; prior to leaving: Y Notes- performed ac tuneup. System was operational upon arrival. Found run capacitor operating below rated value. Replaced with Turbo 200. Would like invoice mailed to him. Scheduled next tune up date: 01/05 9-11
System-1 year Approx Age of System: 1 year Refrigerant Type- R410a Metering Device- TXV SP/HP:117/311 SLT/LLT:48/90 VSAT/LSAT- 37/96 Superheat/Subcool-11/6 Outdoor Entering Air Temp-88 Outdoor Fan FLA- 1.0 Compressor RLA/LRA-10.8/130 Contactor Voltage-245/25 Capacitor Rating-44/6 of 45/7.5 Indoor Return Dry Bulb Temp-74 Return Wet Bulb Temp-60 Supply Temp- 52 Temperature Difference-22 Required Difference-16-24 Blower FLA- 4.3 Filter Sizes â€“ 20x30x1 Changed Filters â€“ N Informed customer replacement is needed, they will swap themselves. Blew out drain line: Y , confirmed valve is open before leaving. Returned tstat to original settings: Y Unit operational; prior to leaving: Y Notes- Living room supply grill is dripping 2-3 times an hour, informed customer a dirty filter or a clogged condensate line are a couple reasons this could be occurring, went ahead and blew out drain line which is included in the tune up and informed a filter replacement is needed, a
System-carrier Approx Age of System: 7 Refrigerant Type- R410a Metering Device- TXV SP/HP: 120/312 SLT/LLT: 68/85 VSAT/LSAT- 40/98 Superheat/Subcool- 20/12 Outdoor Entering Air Temp-85 Outdoor Fan FLA- 1 Compressor RLA/LRA- 12.7/141.4 (rated 135) Contactor Voltage-240 Capacitor Rating- turbo X Indoor Return Dry Bulb Temp-76 Return Wet Bulb Temp-68 Supply Temp- 58 Temperature Difference-18 Required Difference-15-20 Blower FLA- 8.3 Filter Sizes â€“ 20x30x1 ,20x25x1 Changed Filters â€“ N customer will Blew out drain line: N No blow out valve Returned tstat to original settings: Y Unit operational; prior to leaving: Y Notes- system was operational Upon arrival. Performed tune up and found that customer only has pan switch recommended blow out valve to clear any obstructions in the primary line and in line witch to catch the water before it hits the pan. Also compressor has high LRAâ€™s recommended compressor to help regulate it to manufactured specs to prevent
Came out today to perform a whole home inspection. The house is only four years old. Only issues I found were two of the posit temp cartridge is getting hard to turn in the water heaters needs to be flush. Gave estimate the homeowner she is going to show them to her husband and call us back. There was a fourth bathroom I was not allowed to go into because there is a baby sleeping in that room. It is upstairs to the backside of the house.